🎉 Initial Commit

lua/kickstart/health.lua

@@ -0,0 +1,52 @@
+--[[
+--
+-- This file is not required for your own configuration,
+-- but helps people determine if their system is setup correctly.
+--
+--]]
+
+local check_version = function()
+  local verstr = string.format('%s.%s.%s', vim.version().major, vim.version().minor, vim.version().patch)
+  if not vim.version.cmp then
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+    return
+  end
+
+  if vim.version.cmp(vim.version(), { 0, 9, 4 }) >= 0 then
+    vim.health.ok(string.format("Neovim version is: '%s'", verstr))
+  else
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+  end
+end
+
+local check_external_reqs = function()
+  -- Basic utils: `git`, `make`, `unzip`
+  for _, exe in ipairs { 'git', 'make', 'unzip', 'rg' } do
+    local is_executable = vim.fn.executable(exe) == 1
+    if is_executable then
+      vim.health.ok(string.format("Found executable: '%s'", exe))
+    else
+      vim.health.warn(string.format("Could not find executable: '%s'", exe))
+    end
+  end
+
+  return true
+end
+
+return {
+  check = function()
+    vim.health.start 'kickstart.nvim'
+
+    vim.health.info [[NOTE: Not every warning is a 'must-fix' in `:checkhealth`
+
+  Fix only warnings for plugins and languages you intend to use.
+    Mason will give warnings for languages that are not installed.
+    You do not need to install, unless you want to use those languages!]]
+
+    local uv = vim.uv or vim.loop
+    vim.health.info('System Information: ' .. vim.inspect(uv.os_uname()))
+
+    check_version()
+    check_external_reqs()
+  end,
+}

lua/kickstart/plugins/debug.lua

@@ -0,0 +1,90 @@
+-- debug.lua
+--
+-- Shows how to use the DAP plugin to debug your code.
+--
+-- Primarily focused on configuring the debugger for Go, but can
+-- be extended to other languages as well. That's why it's called
+-- kickstart.nvim and not kitchen-sink.nvim ;)
+
+return {
+  -- NOTE: Yes, you can install new plugins here!
+  'mfussenegger/nvim-dap',
+  -- NOTE: And you can specify dependencies as well
+  dependencies = {
+    -- Creates a beautiful debugger UI
+    'rcarriga/nvim-dap-ui',
+
+    -- Required dependency for nvim-dap-ui
+    'nvim-neotest/nvim-nio',
+
+    -- Installs the debug adapters for you
+    'williamboman/mason.nvim',
+    'jay-babu/mason-nvim-dap.nvim',
+
+    -- Add your own debuggers here
+    'leoluz/nvim-dap-go',
+  },
+  config = function()
+    local dap = require 'dap'
+    local dapui = require 'dapui'
+
+    require('mason-nvim-dap').setup {
+      -- Makes a best effort to setup the various debuggers with
+      -- reasonable debug configurations
+      automatic_setup = true,
+
+      -- You can provide additional configuration to the handlers,
+      -- see mason-nvim-dap README for more information
+      handlers = {},
+
+      -- You'll need to check that you have the required things installed
+      -- online, please don't ask me how to install them :)
+      ensure_installed = {
+        -- Update this to ensure that you have the debuggers for the langs you want
+        'delve',
+      },
+    }
+
+    -- Basic debugging keymaps, feel free to change to your liking!
+    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
+    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
+    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
+    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
+    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
+    vim.keymap.set('n', '<leader>B', function()
+      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+    end, { desc = 'Debug: Set Breakpoint' })
+
+    -- Dap UI setup
+    -- For more information, see |:help nvim-dap-ui|
+    dapui.setup {
+      -- Set icons to characters that are more likely to work in every terminal.
+      --    Feel free to remove or use ones that you like more! :)
+      --    Don't feel like these are good choices.
+      icons = { expanded = '▾', collapsed = '▸', current_frame = '*' },
+      controls = {
+        icons = {
+          pause = '⏸',
+          play = '▶',
+          step_into = '⏎',
+          step_over = '⏭',
+          step_out = '⏮',
+          step_back = 'b',
+          run_last = '▶▶',
+          terminate = '⏹',
+          disconnect = '⏏',
+        },
+      },
+    }
+
+    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
+
+    dap.listeners.after.event_initialized['dapui_config'] = dapui.open
+    dap.listeners.before.event_terminated['dapui_config'] = dapui.close
+    dap.listeners.before.event_exited['dapui_config'] = dapui.close
+
+    -- Install golang specific config
+    require('dap-go').setup()
+  end,
+}

lua/kickstart/plugins/indent_line.lua

@@ -0,0 +1,9 @@
+return {
+  { -- Add indentation guides even on blank lines
+    'lukas-reineke/indent-blankline.nvim',
+    -- Enable `lukas-reineke/indent-blankline.nvim`
+    -- See `:help ibl`
+    main = 'ibl',
+    opts = {},
+  },
+}

lua/kickstart/plugins/lint.lua

@@ -0,0 +1,55 @@
+return {
+
+  { -- Linting
+    'mfussenegger/nvim-lint',
+    event = { 'BufReadPre', 'BufNewFile' },
+    config = function()
+      local lint = require 'lint'
+      lint.linters_by_ft = {
+        markdown = { 'markdownlint' },
+      }
+
+      -- To allow other plugins to add linters to require('lint').linters_by_ft,
+      -- instead set linters_by_ft like this:
+      -- lint.linters_by_ft = lint.linters_by_ft or {}
+      -- lint.linters_by_ft['markdown'] = { 'markdownlint' }
+      --
+      -- However, note that this will enable a set of default linters,
+      -- which will cause errors unless these tools are available:
+      -- {
+      --   clojure = { "clj-kondo" },
+      --   dockerfile = { "hadolint" },
+      --   inko = { "inko" },
+      --   janet = { "janet" },
+      --   json = { "jsonlint" },
+      --   markdown = { "vale" },
+      --   rst = { "vale" },
+      --   ruby = { "ruby" },
+      --   terraform = { "tflint" },
+      --   text = { "vale" }
+      -- }
+      --
+      -- You can disable the default linters by setting their filetypes to nil:
+      -- lint.linters_by_ft['clojure'] = nil
+      -- lint.linters_by_ft['dockerfile'] = nil
+      -- lint.linters_by_ft['inko'] = nil
+      -- lint.linters_by_ft['janet'] = nil
+      -- lint.linters_by_ft['json'] = nil
+      -- lint.linters_by_ft['markdown'] = nil
+      -- lint.linters_by_ft['rst'] = nil
+      -- lint.linters_by_ft['ruby'] = nil
+      -- lint.linters_by_ft['terraform'] = nil
+      -- lint.linters_by_ft['text'] = nil
+
+      -- Create autocommand which carries out the actual linting
+      -- on the specified events.
+      local lint_augroup = vim.api.nvim_create_augroup('lint', { clear = true })
+      vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
+        group = lint_augroup,
+        callback = function()
+          require('lint').try_lint()
+        end,
+      })
+    end,
+  },
+}